Menu Listing; Sql; Mclr; Resm - Yaesu VXA-100 Operating Manual

MENU Listing

A listing of the Menu items available via the SET
mode may be found below.

SQL

Function: Squelch Level Setting
Available Values: 0 ~ 8
Default Setting: 6
Select a setting for this Menu item which just silences
the receiver when no signal is present. Use the low-
est setting which will keep the receiver quiet between
incoming transmissions.

MCLR

Function: Memory Channel Clear
To Clear a Memory channel:
1. Recall the Memory channel (MR mode) which
you wish to clear.
2. Select the Menu Item MCLR.
3. Press the VOLUME knob, then rotate the CHAN-
NEL selector knob to recall the memory chan-
nel to be erased ("
display).
4. Press the VOLUME knob, then turn the CHAN-
NEL selector knob one click to change the dis-
play to " xx".
VXA-100 A P
VIATOR
(
MENU "SET"
xx" will appear on the
O M
ILOT PERATING ANUAL
)
MODE
5. Press and hold the (inner) VOLUME knob for 2
seconds to exit.
Important Notice: An "erased" channel cannot be
restored, and " " cannot be erased, as it is
used for "Priority Channel" operation.

RESM

Function: Scan-Resume Mode Setting
Available Values: CAR/5
Default Setting: CAR
In the "CAR" (Carrier Drop) mode, the scanner will
remain halted for as long as there is a carrier present
on the channel; after the carrier drops at the end of
the other station's transmission, the scanning will
resume.
In the "5" (5-Second Pause) mode, the scanner will
halt for five seconds only, after which scanning will
resume (whether or not the other station is still trans-
mitting).
33