Advanced Tab; Diameter Settings Tab - MicroBoards Technology G3 Auto User Manual

MICROBOARDS TECHNOLOGY, LLC

Advanced Tab

The Advanced Tab allows you to Enable Maximum dpi setting and adjust the amount of ink placed
on the disc using the Ink Volume setting.
Enabling the maximum dpi will result in longer times to process your print image, reducing
throughput.
To change the Ink Volume, click the drop-down
box and select Change. A window will open
with a setting bar for the option selected.
Changing the Ink Volume will affect how
quickly you need to replace your ink cartridges,
but also affects the quality of the printed output.
The default settings are the recommended settings and should be used unless absolutely necessary.

Diameter Settings Tab

The Diameter Settings tab allows
you to change the size of the print
image to accommodate the variety of
printable surface area available on
media.
The Outer and Inner Diameters will
change the size of the area to be
printed. To avoid excessive ink
buildup, these values should never
be set so that the G3 Auto Printer is
printing off the media.
The Parameter Unit should remain
on the 0.1mm setting for maximum
precision.
You can also select one of the preset Mask Types to change the diameter settings.
15
G3 AUTO PRINTER