Using The G3 Auto Printer; Loading Discs; Surething Disc Labeler; Creating New Labels - MicroBoards Technology G3 Auto User Manual

MICROBOARDS TECHNOLOGY, LLC

Using the G3 Auto Printer

Loading Discs

Before prining with your G3 Auto Printer, verify that the input hopper is
loaded with discs. The system will accept CD or DVD 120 mm (12 cm)
inkjet printable discs. If the disc does not have an inkjet printable
surface, the ink will not adhere to the surface of the disc. The G3 Auto
Printer will only accept 12 cm discs. Business card or 8 cm
discs are not supported by this system.
Load the first 5 or 6 discs flat, as seen in figure 1.
Load the rest of the discs at an angle, against the wide input
rod, as seen in figure 2.
The G3 Auto Printer will hold a maximum of 50 discs. DO NOT
load more than 50 discs in the system, as this may cause the
discs to feed incorrectly.

SureThing Disc Labeler

SureThing Disc Labeler is included with the G3 Auto Printer and will be installed during the G3
Installation. For more information on using SureThing, please refer to the SureThing Help menu.

Creating New Labels

Any label you create in SureThing must use the Microboards template to print correctly.
1. To create a new label, either click New Project in the Action window on the left, or select New
from the File menu.
2. Click the Select Label button
on the lower left corner of the
dialog that opens to view the
available label templates if the
dialog that opens does not
appear as shown to the right.
3. Highlight CD/DVD Printers in
the Media Type column.
4. Highlight Microboards in the
Manufacturer column.
5. Select from the options listed
in the Label Type column.
We recommend that you use the 17mm inner hole template to ensure that your image will
fully cover the printable surface on both hub printable and non-hub printable media.
6. Click OK to begin designing the label.

Printing Labels

Select Print from the File menu while the label you want to print is open. Be sure that
you have selected the Microboards G Series and that CD/DVD Printer is selected in the
Print Using field before clicking the Print button.
If you are printing more than one copy of a label, enter in the number you wish to print
before clicking the Print button.
13
G3 AUTO PRINTER
Figure 1
Figure 2