Attaching Euro Bucket - Koyker 510 Owner's Manual

ATTACHING THE EURO BUCKET
1. Prior to attaching the bucket, prepare the adapter for engagement by pulling the adapter handle
back (towards the operator) into it's cocked position. With the bucket positioned on level ground,
tilt the bucket adapter forward approximately 45º. (Fig 10-1) Slowly drive forward into the bucket,
centering the adapter with the bucket as you go and position the top mount bar of the adapter
just below the hooks on the back side of the bucket. (Fig 10-2) Slowly raise the loader paying
attention that both hooks are engaged. With the top mount bar fully engaged, slowly roll the
bucket back. The bottom mount bar of the adapter will come in contact with the bottom of the
bucket. (Fig 10-3) Place the handle back in its engaged position (Fig 10-4). Ensure that the pins are
fully engaged thru the bottom hooks on the bucket.
Fig 10-1 Fig 10-2
Fig 10-3
Fig 10-4
Page 10