Attaching Fast Attach Bucket - Koyker 510 Owner's Manual

ATTACHING THE FAST ATTACH BUCKET
1. For pin on buckets, assemble pins and retaining bolts as shown in the Parts Diagram of this manual.
Make sure all retaining bolts are secure and lubricate necessary points. Inspect pin and bolts
periodically for tightness and wear.
2. For Fast Attach Buckets, first tilt the bucket adapter forward so the top round pipe slides into the
receiver on the bucket (Fig. 9-1). Rotate the bucket back so the two rear pins line up with the holes
on the base plates of the bucket (Fig. 9-2). Turn both pins on bucket adapter so they drop through
the holes in the base plate of the bucket (Fig. 9-3). Put #6 hitch pin in place (Fig 9-4).
Fig 9-1
Fig 9-3
Page 9
Fig 9-2
Fig 9-4