1. Connection to the network
1.9 Profile data (continued)
Also, you can register a profile data to My
Connection, when the network connection
is established. When it is established, the
"Connection to Projector successful" screen is
displayed. (&30)
If you wish to use the current connection
setting for My Connection, check in the box for
the [Register this setting to My Connection].
And then, if it is okay to overwrite the present
data for My Connection, click the [OK].
A new profile data will be created and it is
registered as My Connection profile data.
NOTE
• If there are already 10 profile data, the check box cannot be checked.
Please erase one of the existing profile data.
• The profile name for the stored data is assigned by the "LiveViewer"
automatically. The name will be shown at the right side of the check box.
36