Hitachi CP-AW250N User Manual page 31

1.8 Confirming the connection to your destination (continued)
n A Slideshow is currently running on the projector that you are trying to display to.
The projector you want to send your images
to is in the Slideshow mode in the PC-LESS
Presentation.
• Click the [Yes], then the projector will stop
the Slideshow and switch the input source
to the LAN port.
• Click the [No], then the projector is
remained in the Slideshow mode, and the
"LiveViewer" main menu is displayed in
stand-by mode on your computer.
n Are you sure you want to change the input channel of the Projector to LAN?
The projector is not set to the LAN as an
input signal.
• Click the [Yes], then the projector is
switched to the LAN.
• Click the [No], then the projector is
remained as it is, and the "LiveViewer"
main menu is displayed in stand-by mode
on your computer.
1. Connection to the network
31