Hitachi CP-AW250N User Manual page 27

1.7 Configuring the network settings manually (continued)
Wired LAN
1) Enter the following information for the
projector. *1
IP address : 192.168.1.10 (example)
Subnet mask : 255.255.255.0 (example)
2) Click the [Connect].
3) The network connection will be established.
Proceed to item 1.8 Confirming the connection to your destination. (&30)
*1 To find the network setting on the projector, refer to the NOTE. (&22)
[Troubleshooting]
n A network connection could not be established.
Windows prevented network configuration
changes.
You may log in the Windows under User
authority.
Click the [OK], then the "LiveViewer" main
menu is displayed even though the network
is not established. Click
menu and go back to item 1.5 Selecting the
network connection method. (&14)
Consult to the network administrator. Log in the Windows under Administrator
authority. After that, please resume at item 1.3.2 Starting the "LiveViewer".
(&9)
on the main
1. Connection to the network
27