NAD VISO THREE Owner's Manual page 12

IDENTIFICATION OF CONTROLS
REMOTE CONTROL
12
TUNER CONTROL (use with NAD VISO THREE tuner section and other compatible NAD
Receiver, AM/FM/DAB Tuner models)
Set the DEVICE SELECTOR to "TUN" in order to gain access to these buttons. Refer to the corresponding
labels printed in the remote control faceplate and their respective assigned buttons to make use
of these functions. Some of the control buttons below are applicable only to specific NAD Receiver
or Tuner models; check the owner's manual of your NAD Receiver or Tuner for control button
compatibility. You can also load the applicable NAD code library to this device so that it can be made
compatible with your other NAD equipment. Refer to the section below about "LIBRARY" on how to
load a NAD code library.
INFO: Repeatedly pressing this button will show information as supplied by the current radio
station. The applicable display contents include related DAB display information and RDS broadcast
data.
TUNE [ ] or [ ]: Tune forward or backwards.
PRESET [ ] or [ ]: Step up or down Preset numbers.
[ ]: In combination with [TUNER MODE] or other compatible buttons, select through
applicable DAB menu options.
ENTER: Select Preset or Tune mode at AM/FM band. Display signal strength at DAB mode.
AM/FM/DB: Select DAB (230V version only), FM or AM band.
TUNER MODE: Activate "FM STEREO ON" or "FM STEREO OFF" at FM mode. In combination with
[ ] or other compatible buttons, select through applicable DAB menu options.
MEMORY: Save current station into Preset number.
DELETE: Delete selected Preset number or all Preset numbers.
NOTE
For iPod player-specific control buttons, please refer to "CONTROL FEATURES" under "OPERATION –
LISTENING TO YOUR iPod PLAYER".