Configuring With Your Web Browser - LevelOne PLI-3410 User Manual

200mbps homeplug av wireless combo adapter

Hide thumbs Also See for PLI-3410:

Table of Contents

Internet Access Configuration

To configure this device for internet access, you must have IE 5.0 / Netscape 4.5 or above

installed on your computer. There is basically one way to configure your device before you are

able to connect to the internet: Web Interface. Configuration of this method will be discussed in

detail in the following section.

Configuring with your Web Browser

Open your web browser, enter the IP address of your Ethernet Adapter which by default is

192.168.1.1, and click "Go". A user name and password window prompt will appear. The default

username and password are "admin" and "admin".

Congratulations! You are now successfully logon to the PLI-3410 200Mbps HomePlug AV

Wireless Combo Adapter!

If the authentication succeeds, the homepage will appear on the screen.

Table of Contents