Table of Contents
Advertisement
Device Overview
The Description of each labeled part is described in the table below.
WLAN LED
Power LED
PLC (Powerline
Link/Act) LED
ETH (Ethernet
Link/Act) LED
WPS Button
Sync Button
Ethernet Port
Power Plug
Lit green when the wireless function is enabled.
Blinking when data is transmitted or received via WLAN.
Blinking quickly when WPS is proceeded.
Lit green when the device is power on.
Lit off when power is off.
Lit green when the power line sync is established.
Blinking quickly when data is transmitted or received via power line.
Blinking after Sync button is pushed (see Sync Button descripted below).
Lit green when connected to an Ethernet device.
Blinking when data is transmitted or received via Ethernet port.
Push this button to trigger Wi-Fi Protected Setup function.
Used to establish a LAN network with other power line devices.
Push this button for 1~3 second(s) and release it to set device enter the
power line Sync state.
WLAN LED
Power LED
PLC LED
ETH LED
WPS Button
SYNC Button
10
Reset Button
Clip Socket
Advertisement
Table of Contents
