Status Led When Using Focus Assistant; Replacing The Lens - Axis Q1602 User Manual

AXIS Q1602 Network Camera
Hardware overview

Status LED when using Focus Assistant

Status Color
Green
Amber
Red

Replacing the lens

It is possible to use optional lenses for this Axis product. To replace the lens in the camera:
1. Disconnect the iris cable.
2. Unscrew the standard lens; attach and screw on the new lens.
Note
There is no need to restart the camera after changing the lens. The camera must however be restarted if you are
interchanging between a P-iris, DC-Iris or fixed/manual iris lens. In order to set the focus and position the lens, the camera
must be connected to the network.
To select the Iris Configuration:
1. Go to Video and Audio > Camera Settings from the Setup link in the camera's webpage.
2. Click Edit... against Iris configuration:. In the dialog that appears, choose the iris that corresponds to the camera's
lens from the drop-down list and click Ok.
Note
For P-Iris lenses not listed in the drop-down list, download the iris configuration file from www.axis.com
To do this click the Upload tab, browse to the file and click Upload. After the file has been uploaded, select the iris from
the drop-down list and press Ok. In case you select a DC iris configuration for a P-iris lens, an error message appears
against Iris configuration in the Camera Settings page.
Indication
Focus Assistant is enabled
The lens is optimally adjusted
The camera has been moved, or an object has been inserted in front of the lens. Exit and
restart the Focus Assistant.
The lens is less optimally adjusted
The camera has been moved, or an object has been inserted in front of the lens. Exit and
restart the Focus Assistant.
The lens is poorly adjusted
8