Changing The Door Hinging - Miele K 12010 S-2 Operating And Installation Manual

Changing the door hinging

The appliance is supplied right hand
hinged. If left hand door hinging is
required, follow the instructions below.
^ Close the door.
^ Unscrew lower hinge bracket
remove.
^ Then lift the door down and off.
^ Take hinge pin
bracket , then refit in the other hole
of the hinge bracket.
^ Remove cover
the now empty holes on the opposite
side.
^ Unscrew upper hinge pin
it on the other side.
^ Take care not to lose the washer.
44
, and
out of hinge
and use it to cover
and refit
^ Remove the cover at the top left of
the door and refit it on the opposite
side.
^ Fit the appliance door from below
onto upper hinge pin
close the appliance door.
^ Screw hinge bracket
door bearing.
^ Use the long slots in the hinge
bracket to align the door. Make sure
you have tightened all screws
properly.
and then
into the lower