Switching On And Off; Switching Off For Longer Periods Of Time - Miele K 12010 S-2 Operating And Installation Manual

Switching on and off

Before using for the first time
Protective foil
The stainless steel trim to the interior
shelves and the door shelves has a
layer of protective foil to prevent
damage during transportation.
^ Carefully remove the protective foil
from the stainless steel trim.
Cleaning
^ Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
Switching on
^ Turn the On/Off and temperature
selector dial in a clockwise direction
away from the "0" position.
The higher the setting, the lower the
temperature in the appliance.
The appliance will start to cool, and the
interior lighting will come on when the
door is opened.
To enable the temperature to get
sufficiently cold inside the appliance,
allow the appliance to run for approx. 2
hours before placing food in it.
18
Switching off
^ Turn the On/Off and temperature
selector dial in an anti-clockwise
direction from "1" back to the "0"
position. You will meet a little
resistance as you do so.
The interior lighting will not come on
when the door is opened and the
cooling process will be switched off.
Switching off for longer
periods of time
If the appliance is not going to be used
for a longer period of time, e.g. whilst
on holiday:
^ switch the appliance off,
^ disconnect it from the mains,
^ defrost the freezer compartment
(depending on model),
^ clean the appliance out and
^ leave the door ajar to air the
appliance.
If, during a long absence, the
appliance is switched off but not
cleaned out and the door is left shut,
there is a danger of mould and
odours building up inside the
appliance.