Blocking By Time Of Day - Scientific Atlanta FiberEdge User Manual

Blocking by Time of Day

You can block programs in a particular time range, for a single day, a range of days, or a day
of the week such as every Saturday. You can set up blocks by time of day for a maximum of 14
days in the future.
To block by time of day:
1. Press the button
Settings
Settings menu. Use the
"Block: Time New."
2.
Press the button
Select
3.
Enter your Parental Control PIN, if required.
4.
Press the or
Up
tons to highlight the date you wish to block.
5. Press the button
Select
6. In the START column, change the time
shown to the time you want the block to
begin as follows:
> Press the or
Left
>
Press the Up
> When the correct START time is shown, press the
7. In the STOP column, change the time shown to the time you want the block to end as follows:
>
Press the or
Left
> Press the
Up
> When the correct STOP time is shown, press
Note: Blocks do not take effect until you turn on the Parental Control feature. To turn on and
turn off the Parental Control feature, follow the instructions in "Turning Parental Control On
or Off" on page 76.
8.
Press the button
Exit
N
ote: To clear a blocked time, highlight the "Block: Time #" (the # symbol represents the
number of the time period you want to clear), then press
on your remote twice. This will bring you to the General
or
Up Down
.
arrow but-
Down
.
arrow buttons to highlight a setting.
Right
or Down arrow buttons to change each setting.
arrows to highlight the setting to change.
Right
or arrows to change each setting.
Down
to return to watching TV.
arrow buttons to locate and highlight
button .
Select
to accept.
.
Continued on Next Page
57