Scientific Atlanta FiberEdge User Manual page 53

Duration of Caller ID Display on Your Screen
The default setting for the TV Caller ID display is 15 seconds. However, this setting can be adjusted.
Changing Your Caller ID Display Duration
To change Caller ID display duration:
1. Tune to Channel 411.
2.
Use the Up
press the
Select
3. Use the
Up
the button
Select
4. Use the
Up
and press the
5.
Use the Up
range from 5 to 240 seconds. Press the
Note: Caller ID Display Duration settings are STB-specific and changes will only apply to the TV
on which you make them. Follow the same instructions above to make changes on each TV with
a STB in your home.
TV Caller ID
52
or Down arrow buttons on your remote to scroll to "Settings" and
button .
or arrow buttons to scroll to "Caller ID Settings" and press
Down
.
or arrow buttons to scroll to "Set Caller ID Display Duration"
Down
button .
Select
or Down arrow buttons to locate your preferred duration. Options
button to set the display duration.
Select