Related Manuals for Comfort Zone CZ2022O
Summary of Contents for Comfort Zone CZ2022O
- Page 1 Model No. CZ2022O – Oak Finish CZ2022W – Walnut Finish CZ2022C – Cherry Finish CZ2022B – Black Finish QUARTZ INFRARED HEATER OWNER’S MANUAL PLEASE SAVE THESE INSTRUCTIONS...
-
Page 2: Important Instructions
WARNING: READ THIS OWNER’S MANUAL CAREFULLY BEFORE USE. Thank you for choosing the COMFORT ZONE® Infrared Heating System. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new heater. -
Page 3: Specifications
17. Always unplug the unit before moving or cleaning, or whenever the heater is not in use. 18. Use only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by unauthorized dealers may cause hazards. -
Page 4: Product Diagram
WARNING: This heater has a voltage rating of 120 volts. The cord has a plug as shown in (A). An adapter as shown in (C) is available for connecting three-blade grounding-type plugs to two-slot receptacles (B). The grounding lug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. -
Page 5: Control Panel
Control Panel 1. Signal-receiving window: for receiving remote control signal. 2. Digital display indicate set room temperature or time value of the timer. 3. Power indication Light: indicates when the unit is connected to power supply and rear master power switch is on. 4. -
Page 6: Remote Control
Remote Control Mode button: Used for mode selection Power Mode ON/OFF button: Used for power-on or power-off when master power switch on rear of unit is on Temp up button: to increase set temperature Temp. Up Temp down button: to reduce set temperature Temp. -
Page 7: Operating Instructions
OPERATING INSTRUCTIONS 1. Start and select working mode With master power switch at the rear of the unit on, turn the heater on by pressing the ON/OFF button on the control panel or by pressing the Power button on the supplied remote control. - Page 8 3. Setting timer-power-off Note: ONLY under power-on mode can you set timer-power-off function. After starting the unit, press the timer button on the control panel. Digital display changes from set temperature to time value for the timer. Each press of the timer button will increase the timer length by 1 hour up to 12 hours.
-
Page 9: Maintenance
MAINTENANCE 1. Turn off the master power switch in the rear of the unit. 2. Unplug the unit and let it cool completely. 3. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. -
Page 10: Troubleshooting
LIMITED WARRANTY Products manufactured by Comfort Zone® are warranted to the original consumer to be free of defects in material and workmanship for twelve (12) months from the original date of purchase. The warranty does not cover products modified outside our factory, damage or failure caused by...
Need help?
Do you have a question about the CZ2022O and is the answer not in the manual?
Questions and answers