Comfort Zone CZ273 Series Manual

Portable industrial heater

Table of Contents

Download this manual

CZ273 Series

Portable Industrial Heater

Features:

• High Heat Setting - 3,600W (12,300 BTU)

• Fully Enclosed Motor for Extended Use in Dusty Environments

• Waterproof and Dustproof up to IP24

• Fan-Forced for Wide Heat Circulation

• Fan-Only Setting for Year-Round Air Circulation

• Adjustable Thermostat

• Portable - Uses NEMA 6-20R Receptacle

• Durable, High-Quality Stainless Steel Heating Element

• Safety Overheat Protection

• Non-Tip Stable Base

• Tilt Angle Adjustment

• Convenient Handle with Integral Cord Wrap

• Sturdy Heavy Gauge Steel Body

• 208-240V AC, 60Hz, 15A, 12,300 BTU

Save These Instructions

www.comfortzoneproducts.com

Table of Contents

Do you have a question about the CZ273 Series and is the answer not in the manual?

Page 1 CZ273 Series Portable Industrial Heater Features: • High Heat Setting - 3,600W (12,300 BTU) • Fully Enclosed Motor for Extended Use in Dusty Environments • Waterproof and Dustproof up to IP24 • Fan-Forced for Wide Heat Circulation • Fan-Only Setting for Year-Round Air Circulation •...
Page 2 For repairs covered under warranty, see warranty extension cord or relocatable power tap (outlet/power strip). Always unplug statement. For all other repairs contact Comfort Zone® Customer heater when not in use. Service by telephone or mail for information and assistance.
Page 3 www.comfortzoneproducts.com USAGE CONTROL PANEL HEATER OPERATION: Always operate the heater in the upright position following all instructions and recommendations listed in this Fan Only manual. POWER HEATER LOCATION: Place the heater in the area of the room that LIGHT is coldest. The heater should not be placed immediately under a power Heating outlet.
Page 4 www.comfortzoneproducts.com LIMITED WARRANTY TILT ANGLE ADJUSTMENT This unit is guaranteed to the original retail purchaser against defects in This heater can be tilted to adjust the direction of the air to the desired quality or workmanship for a period of one year from the date of original angle.