Radio Frequency Output; Local Time Setting - Topfield SBI-2070 User Manual

34 Preference Settings

4.2.5 Radio frequency output

Table 4.1: Television standards by country
Signal type
NTSC M

4.3 Local time setting

out decoding so that your audio-video receiver can decode it.
Otherwise, set it to On, then the digital receiver will output
decoded Dolby Digital audio, scaling it down to two channels.
NOTE
Only if the service you are currently watching provides
a Dolby Digital audio track, you can enjoy Dolby Digital
sound.
When you have connected your secondary television to the RF
OUT socket of the digital receiver, you should configure the ra-
dio frequency output. The digital receiver can make analogue
television from digital television and output it via the RF OUT
socket.
Country
Bahamas, Belgium, Bolivia, Chile, Ecuador, Fiji, Guam, Jamaica, Mexico,
Panama, Peru, Dominican Republic, United States, Venezuela
Set the RF Channel option to your desired channel number.
Then you have to retune your television set to the new channel
number.
You should set your local time for timer events. If you do
not set the local time correctly, the programme time table pro-
vided by the programme guide may be distrustful. For the pro-
gramme guide, refer to §5.3.