Abit SM5 User Manual page 16

2-8
Power input Connectors Watch the pin number and the orientation
These have a specific orientation. The three warning marks indicate that if you make a
mistake in pin number or connection orientation, you could destroy your equipment.
During installation, you just need to connect to the correct pins and in the correct
orientation, and to connect connectors P8 and P9 of the power supply unit to the
connectors on the mainboard.
Pin number
1
2
3
4
5
6
Infrared remote Connector Watch the pin number and the orientation
This has a specific orientation. Your mainboard supports this feature, but you must
buy the infrared remote device as an option.
Model name
Pin number
1
2
3
4
5
Name of the signal or
signification
POWERGOOD
+5VDC
+12VDC
-12VDC
Ground
Ground
SM5 (JP2)
Name of the signal or signification
+5VDC
No connection
Receive data
Ground
Transmit data
Name of the signal or
Pin number
7
8
9
10
11
12
SM5-A (JP14)
Chapter 2
signification
Ground
Ground
-5VDC
+5VDC
+5VDC
+5VDC