IRiver SPINN User Giude page 48

Using Windows Media Player 11
Initializing Disk
1. Connect the product to the USB jack of your PC and
run Windows Media Player 11.
2. After selecting iriver SPINN, click the right mouse
button and select Format. Click OK when the
message to confirm initialization appears.
3. The initialization process is completed and the
product is disconnected from your PC.
You need to backup the necessary files before initialization, since formatted files
cannot be recovered.
It is recommended to use the format function integrated in the SPINN.
Other Information
47
Firmware upgrade in Windows Media Player 11
1. Connect the product to the USB jack of your PC.
2. Run iriver Firmware Updater application in the
installation CD and complete the upgrade process
by following the on-screen instructions.
Do not disconnect the product from PC while upgrading firmware.