Using Iriver Plus 3; Upgrading Firmware - IRiver SPINN User Giude

Using iriver plus 3

Initializing Disk
1. Connect the product to the USB jack of your PC and
run iriver plus 3.
2. Select Tools > Portable Device > Initialize Disk and
click Start when the initialization confirmation
message appears.
3. The initialization process is completed and the
product is disconnected from your PC.
You need to backup the necessary files before initialization, since formatted files
cannot be recovered.
It is recommended to use the format function integrated in the SPINN.
Other Information
44

Upgrading Firmware

1. Connect the product to the USB jack of internet
enabled PC and run iriver plus 3.
2. Select Tools > Portable Device > Firmware Upgrade
and complete the upgrade process by following the
on-screen instructions.
Do not disconnect the product from PC while downloading firmware upgrade file.
Once the download is completed, disconnect the product to activate the
firmware upgrade.
If the already installed firmware is the latest version, the message to confirm
latest version appears. When connect the product to your PC, if there is latest
firmware, the instruction message appears automatically.