Samson DB1800A Product Specification Sheet

PRO
PRODUCT
DB1800A
SERIES
DB
TYPE:
POWERED &
PASSIVE
DESCRIPTION
ACTIVE SUBWOOFER
CATEGORY
PUBLIC ADDRESS
GENERAL DESCRIPTION
The dB1800a is a self-powered subwoofer featuring an
18" heavy duty driver, complemented by a 500 Watt power
amplifier. The dB1800a also offers an active stereo cross-
over providing a high-passed output for running your satellite
speakers. Solid 3/4 inch plywood construction, steel corners,
tough carpet covering and larger casters make the dB1800a
a road warrior. In fixed installation systems, the dB1800a
provides super tight low frequency output in a relatively small,
unobtrusive enclosure. The dB1800a is a perfect add-on to
your dB500 and Expedition system, or for any sound rein-
forcement system where extended low-end is desired. While
FRONT PANEL
using your dB1800a, you'll have great low-end anywhere.
FEATURES
Heavy-duty, 18 inch Low Frequency Transducer With Butyl
>
Rubber Surround
> Built-in 500 Watt Power Amplifier
Balanced High Pass Outputs for Satellite Speakers
>
Variable Crossover 30 - 200 Hz
>
Stereo / Mono Operation Switch
>
> Volume Control
> Heavy-Duty, Rear Mounted Casters
Extra Large Grab Handles
>
35mm Pole Mount Receptacle
>
> Heavy-Duty, Steel Grill
BACK PANEL
> 3/4" Plywood Construction, internally braced and covered
in tough carpet
> Three-year extended warranty
ARCHITECT'S & ENGINEER'S SPECIFICATIONS
The DB1800A shall be a wooden subwoofer cabinet to
be used as a FOH subwoofer. It shall be black and have
metal mesh grills. It shall have a 500 watt class G power
amplifier. It shall have a 18 inch woofer for low frequencies.
The DB1800A shall have 2 XLR balanced line inputs with
level control and frequency sweep control for the crossover.
The DB1800A shall have an amplifier clip and protection
LED indicator. The DB1800A shall also have a mono/stereo
switch. A standard IEC connector and cable will be supplied
for connection to AC power sources.
©2006 Samson v1.0 5/06