Blade Guard Assembly - Grizzly G0605X1 Owner's Manual

Blade Guard
Assembly
Figure 63
Figure 63.
Guard
Spreader
In order to work properly, the spreader
cannot be bent or misaligned with the blade.
If the spreader gets accidentally bent, take
the time to straighten it or just replace it.
Using a bent or misaligned spreader will
increase the risk of kickback! Refer to
Page 68 to check or adjust alignment if
necessary.
Installing Blade Guard & Spreader
1.
2.
3.
Figure 64
4.
5.
Figure 64