System Versatility - Sony DXC-D55 Series Brochure & Specs

System Versatility

The high picture quality and operability of DXC-D55 Series cameras is supported by a range
of peripherals that make camera system installation very smooth, both in the studio and out in the field.
The DXC-D55 Series can be configured in two main operating styles: Multi-core CCU and Triax CCU
operation. Easy-to-use remote control panels are also available for added operational convenience.
Triax CCU Operation – for Wide-bandwidth Transmission
CA-TX50P Rear Panel
CCU-TX50P and CA-TX50P
With the CA-TX50P Triax Camera Adaptor
attached, the DXC-D55 Series can be
remotely controlled from the CCU-TX50P
Camera Control Unit using a triax cable, the
use of which enables sophisticated remote
control over extended operating distances.
A wide-bandwidth transmission system is
employed, enabling the higher resolution
images of DXC-D55 Series cameras to
be transmitted with virtually no drop in reso-
lution.
The CCU-TX50P supports the following features:
> Wide-bandwidth transmission
(10 MHz for Y and 4.5 MHz for R-Y/B-Y)
> High-quality analogue component video
transmission
> Long-distance transmission
(eg. 1500 m via a 14.5 mm Ø cable)
> Compact design – half rack width and
3U height
> Wide range of advanced control
functions
> Compatibility with the RCP-D50 and
RCP-D51 Remote Control Panels
> Three SDI outputs or three composite
outputs
* Upgrading is required for the existing CCU-TX50P to interface with the DXC-D55P.
CCU-TX50P Rear Panel
CCU-TX50P Front Panel
> One component output
(Y/R-Y/B-Y or R/G/B selectable)
> Three inputs for return video
(BNC type)
> Teleprompter support
> Red/Green tally indication
> Support for major intercom systems
(four-wire/RTS/Clearcom)
> Programme audio input
> Two-channel microphone system
(two XLR connectors)