Connections - Proficient GS6 Owner's Manual

CONNECTIONS

In the illustration above, Diagram 4 shows the GS6 Line IN connected to the Pre-amp OUT on a stereo audio receiver.
Always be sure the Power switch is turned OFF before making any connections.
LINE INPUT
1. Using a stereo RCA to mini cable terminated with gold ends, connect the L & R Pre-amp OUT on a stereo audio receiver to
the Line IN on the GS6 or use a stereo mini-mini for connection to a computer line output. The GS6 will sum the left and right
channels into a single sub channel. The GS6 frequency response is 35Hz - 200Hz so it will only output low frequency sound.
2. Set the GS6 Sub Volume to balance the low frequency audio output of the GS6 with the main speakers so the GS6 bass level
sounds like a natural extension of the main speakers. Once set, adjust system volume (main speakers and sub) with the audio
receiver/amplifier remote control or front panel volume control.
TYPICAL
AUDIO RECEIVER
Audio Receiver
Pre-amp OUT
To Stereo Speakers
Pro cient GS6 Subwoofer
Diagram 4 GS6 Line IN Connections
Stereo
RCA to Mini
Patch Cable
Subwoofer
LINE IN
9
CONNECTIONS