Gs6 Features; Gs6 Subwoofer Rear Panel - Proficient GS6 Owner's Manual

GS6 FEATURES

1
2

GS6 SUBWOOFER REAR PANEL

1. POWER - Turns the power to the GS6 ON/OFF. Always turn the power OFF when making connections to the GS6. The Power
LED will illuminate red to indicate Standby (power switch ON, no audio signal present), and green to indicate that the GS6 is
ON (audio signal present).
2. AC INPUT - Universal power connector. Automatically selects AC voltage for a given region. Connect to the included
2-conductor AC Power Cord. After all connections have been made and confirmed, plug the power cord into an unswitched
AC Outlet to power the GS6. Contact Proficient Audio Systems for a proper replacement should the AC Power Cord be
damaged or misplaced.
3. SUB VOLUME - Adjusts the audio level of the GS6 Subwoofer. This allows the Sub audio level to be balanced with the audio
level of the satellite speakers. Adjust until bass is full and natural sounding.
4. POWER LED - The Power LED will illuminate red to indicate Standby (power switch ON, no audio signal present), and green to
indicate that the GS6 is ON (audio signal present).
5. ON/AUTO -
ON position defeats audio sensing on the Line Input. The GS6 amp will always be ON if the Power switch is in the
ON position.
AUTO position will sense audio input on the Line Inputs and turn the GS6 amp ON (from standby) when an audio signal
is present. The GS6 amp will turn OFF (standby) automatically when no audio signal has been detected for more than five
minutes.
6. Line IN - One stereo 3.5mm mini jack. Connect to the L&R line level audio outputs of an audio source such as a CD player,
cable box, satellite receiver, computer, etc. The Line In can also be connected to the headphone jack on a portable music
player or other similar device. When used with a stereo source, the GS6 will sum the left and right channels into a single
output channel so all low frequency information gets processed.
Diagram 1 GS6 Sub Amp Plate Features
6
3
4
5
6