For questions, contact Wybron at 1-800-624-0146 or visit www.wybron.com. Product Modification Warning Wybron, Inc. products are designed and manufactured to meet the requirements of United States and International safety standards. Modifications to the products could affect safety and render the product non-compliant to relevant safety standards.
Page 5
Pour les questions, Wybron de contact à 1-800-624-0146 ou visite www.wybron.com. L’Avertissement de Modification de Produit Les produits de Wybron, Inc. sont conçus et a fabriqué pour rencontrer les conditions d’Etats-Unis et de norms de sûreté internationals. Les modifications aux produits pourraient affecter la sûreté...
Introduction Wybron's 150-, 300- and 600-watt PS Power Supply units attach easily to a truss or can be mounted into a 19-inch rack. A Power Supply unit can be controlled by one or several DMX512 channels that send DMX signals from the lighting console to each device along with 24 volts DC.
System Components Power Supply The power supply accepts DMX512 from a lighting console and passes it along with 24VDC power to each device. This eliminates the need for separate control and power cables to each device. The DMX512 control signal can also be daisy chained to other PS power supplies or other DMX-controlled devices.
Supplies and their companion devices. This is current as of the print date of this manual. As more products are added to the compatible line, an updated list will be available on the Wybron Web site at www.wybron.com. Power Supply...
The rack mount kit will accommodate two units side-by-side. Connect the Device to the Power Supply Connect the device to the Power Supply using Wybron’s 4-pin power/data cable. Refer to the HEAD-FEET RESTRICTION section of the manual for details of the length of cable runs.
(voltage) will be too low. HEAD-FEET is defined as "the sum of cable lengths from each device to a single power supply output.” For Head-Feet information on a specific Wybron product, please refer to that product’s user manual. Power Supply User Manual...
Mounting and Installation Accessories The following sections describe how to install and replace mounting accessories. Power Supply Hanger Brackets The Power Supply units are shipped with hanger brackets to allow pipe or truss mounting. Follow these steps to install the hanger bracket. 1.
The heart of the Infotrace system is Infogate — specialized software that uses RDM to facilitate remote addressing and diagnostics for potentially every piece of equipment mounted on a rig. Infogate works with all Wybron-manufactured IT products as well as RDM-compatible equipment from any other manufacturer.
Cables Power/Data Cable The power/data cable uses 4-pin XLR connectors on either end and consists of two 14 AWG conductors and a 22 AWG twisted, shielded pair. The shells of the two XLR connectors are not electrically connected together, preventing large power currents from flowing from chassis to chassis of the equipment.
Parts List Callout Quantity Part Number Description SCRFH632150 Flat head screw Z-2287 Grommet F0825 Fan 600W F6025S Fan 300W/150W 2060-01-02 Board bracket 600W only SCHRFHM4X8 Flat screw head 4mmX8mm SCRPH440025P Pan head black with patch SCRFHM4X8 Flat screw head 4mmX8mm SCRFH832037 3/8 Flat head black stainless 2024-01-06...
Model Numbers Power Supply Units 20600 ............PS-600 20300 ............PS-300 20150 ............PS-150 Mounting Accessories 715-01-03P...........PS-600, PS-300, and PS-150 hanger bracket SCRWC252075 ..........Wing screw for power supply hanger bracket to pipe SCRSC2520037 ...........Socket cap screw for hanger bracket to power supply Power/Data Cable 7042-3 ............3' power/signal cable...
Warranty Information WYBRON, INC. warrants to the original owner or retail customer that for a period of one year from date of delivery of a portable system or energization of a permanently installed system (up to a maximum of 18 months from delivery) its products will be free from defects in materials and workmanship under normal use and service.
Need help?
Do you have a question about the PS-600 and is the answer not in the manual?
Questions and answers