Card Reader And Usb Operation - Oppo LT-1005DT User Manual

CARD READER AND USB OPERATION

USAGE OF USB DEVICE AND 3 -IN-1 CARD READER
USB refers to Universal Serial Bus. Most of USB devices on the market are USB1.1 or USB2.0.
Here are some common types of USB 1.1 devices:
Monitors, Communication devices, Audio Human Input Device(HID), Mass storage drives etc.
Most flash memory ,USB HDD etc. belongs to Mass Storage Class. Mass Storage
Class includes 2 transport manners:
1. USB 1.1 Mass Storage Class Control/Bulk/Interrupt (CBI) Transport
2. USB 1.1 Mass Storage Class Bulk-Only Transport
This unit supports USB 1.1 Mass Storage Class Bulk-Only Transport.
When using USB 1.1 Mass Storage Class Bulk-Only Transport devices, please note that
the file operation system only supports Windows FAT, if does not support FAT32 and NTFS
file systems.
The 3-in-1 card reader of this player can read SD Card (Secure Digital Card), MMC Card
(Multi Media Card) MS Card (Memory Stick Card).
Important: Before you use the USB or card reader function, you should change the
input source of the TV to DVD and press [CARD/DISK] button.
1. Using USB devices:
Please insert USB devices into the USB jack of this unit then press [CARD/DISK] button .
After correctly reading USB devices, the screen will display an operation menu.
Please refer to the part of "JPEG FILE PLAYBACK" on page 22 for details.
2. Play 3-in-1 CARD READER
In DVD mode, press [CARD/DISK] button, the TV set will detect and read card.
If there is a supported card in the card port ,after reading card data correctly, an operation
menu will be displayed on the screen.
If you want to switch to DVD state, please press [CARD/DISK] button to exit USB
and card read state.
UP
CARD/DISK DVD MENU
DOWN
PLAY
24
USB jack
MEDIA CARD socket
RATIO
CARD/DISK