Playback - Oppo LT-1005DT User Manual

PLAYBACK

DVD SVCD VCD CD
1. Power on and switch signal source to DVD mode and the unit begins to work.
2. Place the disc (with label side facing users) to the door and the unit will draw in the disc
automatically.
The unit begins to read disc information.
3. Press [ ] button to begin playing disc.
When the unit playing a disc, press[
[ ] button again and the unit goes to frame-by-frame playback. Press [
resume to playback.
4. Press [ ] button to stop playing.
When the unit is playing a disc, press [
press [ ] button again and the unit enters stop state.
At the pre-stop state, if you press [
At the stop state, if you press [
Press [ ] button when playing some discs and the unit enters stop state directly.
5. Press [ ] button to take out disc.
6. When finishing playing, switch signal source to other working state or press [
to make the unit enter standby state. Please pull out the power plug from power socket
when not using the unit for a long time.
[ ] button is effective only when in DVD mode. In other signal source ,such as TV,AV, etc, this
button is invalid.
VOLUME CONTROL
DVD SVCD VCD CD
1. Press [VOL+/VOL-] buttons on the remote control of this unit.
Press [VOL+] button to increase volume; press [VOL-] button to decrease volume; the
maximum volume is 100.
DVD OPERATION
EJECT
PLAY
] button the firs time and the unit enters pause state, press
] button the first time and the unit enters pre-stop state,
] button, the unit will continue to play from the stopped point.
] button, the unit will play from the beginning point of the disc.
17
STANDBY
STOP
] the third time to
+
VOL
-
VOL
] button