Fm Operation - Oppo LT-1005DT User Manual

FM
With radio decoder built in , you can enjoy radio programs using this unit.
Connect the FM antenna in the accessories to the FM socket on the left panel of the TV, change
source to FM. Press [SETUP] button and a menu will show as follows:
1. CHANNEL:
Display current channel number, press [
2. FREQUENCY:
The frequency of current channel, press [
3. MANUAL SEARCH:
Search a new channel for current channel number, press [
press [ ] button to increase frequency. When a channel is found, manual search will stop and the
program will be stored.
4. AUTO SEARCH:
Search and store all the channels in FM band 87.5--108MHz. Move the cursor to AUTO SEARCH,
it becomes high lighted, then press [OK] or [
When auto search is going in, press [SETUP] button to give up AUTO SEARCH.
NOTE
Up to 20 channels can be preset/stored,and you can recall them in 2 ways:
Method 1:
For programs 1 ~ 9, press the number buttons on remote control to access them.
For programs 10 ~19, press "-/--" first ,then press "0 ~ 9" to access to them;
For channel 20, just press "-/--" twice to access it.
Method 2:
When the CHANNEL is high lighted, Press [
button to increase channel.

FM OPERATION

FM
CHANNEL
FREQUENCY
MANUAL SEARCH
AUTO SEARCH
SELECT ENTER OK
] button to change channel.
] button to adjust it.
] button to auto search.
] button to decrease channel and press [
12
12
101.20MHz
RETURN SETUP
] button to decrease frequency and
]