Let's Start; Change Source Operation - Oppo LT-1005DT User Manual

After the unit has been suitably placed / fixed on the desk or your car, and all cords are
connected for power, input and output .
If your unit is not fixed with the battery pack, connect the adapter to the LCD TV, the unit will
go into standby mode, and you can see the indicator turn red.
If your unit is fixed with the battery pack, and the quantity of electricity is high enough, the
unit will go to standby mode, the indicator will turn red. If not, please check the battery pack
or contact authorized service department.
What you should do next is, press the STANDBY key on the top panel of the TV, or [STANDBY]
button on the remote control to make the unit switch to power-on mode then you will see the
LED indicator turn green. Now you can enjoy the many features of your new product.
STANDBY

CHANGE SOURCE OPERATION

You can change the input source from the source menu. Press [SOURCE] button on unit or
[SOURCE] key on remote control to show the menu on screen.
The current source item is highlighted. Press [
CH-] key on the top panel of LCD TV to select your desired mode. Press the [ ] or [OK]
button to confirm your choice .

LET'S START

INDICATOR
TV
DVD
AV
DVB
FM
] buttons on the remote control, or [CH+/
6
PICTURE
STANDBY