Advertisement
2. An air pressure of 90 PSI is required.
3. Drain the air tank daily. Water in the airline can damage the tool.
4. Clean the air inlet filter weekly.
5. Line pressure should be increased to compensate for longer air hoses (over 26 feet or 8
meters). The hose diameter should be 3/8in. I.D.
6. Keep the hose away from heat, oil and sharp edges. Check the hose for wear and make
certain that all connections are secure.
WARNING: Make sure the Air Impact Wrench is disconnected from its power source before
attempting any maintenance, cleaning, or inspection.
•
Maintain your Air Impact Wrench. It is recommended that the general condition of any tool be examined
before it is used. Keep your Air Impact Wrench in good repair by adopting a program of conscientious
repair and maintenance in accordance with the recommended procedures found in this manual. If any
abnormal vibrations or noise occurs, turn the Air Impact Wrench off immediately and have the problem
corrected before further use. Have necessary repairs made by qualified service personnel.
•
Cleaning. Use only soap and a damp cloth to clean your Air Impact Wrench. Many household cleaners
are harmful to plastics and other insulation. Never let liquid get inside the tool.
MAINTENANCE
5 OF 7
Advertisement
