Operation The Basics Power All Acoustic Image integrated amplifiers are based on a superb class-D power Preamp amp that delivers 300 Watts into 2 ohms (Clarus amps), 350 Watts into 2 ohms (Clarus SL amps) or 600 Watts into 4 ohms (Focus amps) and on a Inputs sophisticated, sensitive preamplifier.
Operation Power The two instrument inputs are separately buffered. This allows you to plug two instruments into your amp and play them separately or together. This feature is useful when you are doubling on two instruments with different impedance requirements (for example, electric and acoustic guitar or bass). Plug the CAUTION: TO REDUCE THE AC Input RISK OF ELECTRIC SHOCK...
® Notch HP Effects Freq Loop Low Z Power Input Send Return High Z Level Bass Treble Brite Level Filter Master Direct Out Ground Lift Reverb ® Notch HP R2 R3 Program Level Effects Freq Loop Low Z Power Send Input Return High Z...
Focus amps). Use a high quality speaker system in order to get the maximum performance from the amp. The Acoustic Image Contra EX is an in each channel controls the volume of the returned (“wet”) signal relative to the original (“dry”) signal.
Use a clean, dry cloth to clean the surfaces of the amplifier. Note that there are no user-servicable System parts inside the amp. Refer servicing to qualified Acoustic Image or other Frequency Response 20 Hz - 20 kHz, ±0.5 dB technicians.