Installation - RCF SUB 8006-AS Owner's Manual

It is possible to stack HDL 20-A on top of SUB 8006-AS in vertical or horizontal position.
It is possible to stack HDL 20-A on top of SUB 8004-AS in horizontal position.
It is possible to stack HDL 10-A on top of SUB 8004-AS in vertical position.
Always stack the systems using the HDL 20-A (HDL 10-A) fly bar and the locking accessory
(part number 13360231).
WARNING: Never suspend SUB Series subwoofers by there handles. Handles are intended
for transportation, not for rigging
WARNING: Always make sure that the maximum current requirement does not exceed
the maximum admitted POWERCON current. In case of doubt call the closest RCF SERVICE
CENTRE.
SUB 8006-AS, SUB 8004-AS INTERNAL FUSE
220-240V 2XFUSE T 6.3 A H 250 V (1 X SUB 8004-AS)
100-120V 2XFUSE T 10 A H 250 V (1 X SUB 8004-AS)
STACKING

INSTALLATION

WARNING
WARNING
SUB 8006-AS,
SUB 8004-AS
INTERNAL FUSE
9