(wall, ceiling, structure, etc.), and the components used for attachment (screw anchors, screws, brackets not supplied by RCF etc.), which must guarantee the security of the system / installation over time, also considering, for example, the mechanical vibrations normally generated by transducers.
RCF S.p.A. will not assume any responsibility for the incorrect installation and / or use of this product.
Page 5
AV presentations. The low-frequency transducers are a 10” woofer for S 10, a 12” woofer for S 12 and a 15” woofer for S15, all equipped with a 2,5” voice coil. The woofer design is the result of the latest refinements in RCF experiences in compact active and passive subwoofer design, resulting in a fast and controlled reproduction of the bass frequency range.
INSTALLATION S Series subwoofers shall be placed on the floor (on a place surface). Satellite loudspeakers shall be installed securely by qualified personnel, respecting all safety standards. Make sure the support structure (walls / ceilings) has the necessary mechanical characteristics for the loudspeaker weight, without the risk of a fall that could damage things or cause an injury.
- Do NOT connect the low impedance input directly to 70 / 100 V constant voltage lines. ± SPECIFICATION µ ÷ S 10 S 12 S 15 Frequency Response (-10dB) 50 Hz ÷ 200 Hz 40 Hz ÷ 200 Hz 35Hz ÷...
Verificare inoltre l’idoneità del supporto (parete, soffitto, struttura ecc., al quale è ancorato il prodotto) e dei componenti utilizzati per il fissaggio (tasselli, viti, staffe non fornite da RCF ecc.) che devono garantire la sicurezza dell’impianto / installazione nel tempo, anche considerando, ad esempio, vibrazioni meccaniche normalmente generate da un trasduttore.
Page 10
L’installazione e l’utilizzo errati del prodotto esimono la RCF S.p.A. da ogni responsabilità. ATTENZIONE: Per prevenire i rischi di fiamme o scosse elettriche, non esporre mai questo ATTENZIONE prodotto alla pioggia o all’umidità.
Page 11
Estendendo la loro risposta in frequenza fino 50 Hz (S 10), 40 HZ (S 12) o 35 HZ (S 15) questi sistemi ad alta efficienza offrono livelli di uscita normalmente associati a cabinet di ben più grandi dimensioni.
INSTALLAZIONE I subwoofer della serie S devono essere posizionati su pavimento (su una superficie piana). L’installazione dei diffusori acustici “satelliti” deve essere effettuata da personale qualificato rispettando gli standard di sicurezza. Eseguire un’installazione sicura di ogni diffusore, controllando che la struttura di supporto (es. parete, soffitto, montaggio su palo...) abbia le necessarie caratteristiche meccaniche, tali da consentirle di sopportarne il peso senza il pericolo di cadute che potrebbero compromettere l’incolumità...