External Device; Connecting To An External Amplifier; General Setting; Turning Mute Mode On/Off (Int Mute) - Alpine CDA-9883 Owner's Manual

External Device

Connecting to an External Amplifier

POWER IC ON (Initial setting) / POWER IC OFF
When an external amplifier is connected, sound quality can be
improved by stopping the power supply of the built-in amplifier.
POWER IC OFF: Use this mode when the line output of this unit
is used to drive an external amplifier. In this
setting, the head unit's internal amplifier is
turned OFF and can not drive speakers.
POWER IC ON : The speakers are driven by the built-in
amplifier.
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
• No sound is produced by the system when the power output is set to
OFF.

General Setting

Turning Mute Mode On/Off (INT Mute)

MUTE ON / MUTE OFF (Initial setting)
If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
Front
left
Amplifier
Front
right
Rear
left
Amplifier
Rear
right
Speakers
Front
right
Rear
right
Rear
left
Front
left

Setting the AUX Mode (V-Link)

AUX IN ON / AUX IN OFF (Initial setting)
You can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable (KCA-121B) or Versatile Link Terminal (KCA-410C)
to this component.
You can change the AUX name display when AUX IN is set to ON.
Press / /ENT when AUX IN is set to ON, and select AUX NAME
by turning the Rotary encoder, and then press
After that, turn the Rotary encoder to select the desired AUX name.
If the KCA-410C is connected, it is possible to select two AUX names.
• Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE/
then press BAND to select your desired device.

Changer Name Setting

CHANGER (Initial Setting) / USB / PORTABLE
This setting is used when the head unit is connected to the USB Adapter
for MP3 (KCA-620M). You can set the name to be displayed on the unit
depending on the device to which the USB Adapter for MP3
(KCA-620M) is connected.

Setting the External Digital Input

D-AUX ON / D-AUX OFF (Initial setting)
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H701) and a DVD player (DVE-5207) not compatible with Ai-
NET are connected, set Digital AUX to ON to enjoy 5.1-channel
surround sound.
• Press SOURCE/ , and select the DIGITAL-AUX mode, and adjust
the volume, etc.
• Depending on the connected audio processor, DVD player sound
may continue to be output, even though the source is changed to
another one. If this occurs, set the DVD player's power to OFF.

HD Radio (Only when HD Radio is connected)

HD Radio Station Call Setting (STATION CALL)

SHORT (Initial setting) / LONG
In the HD Radio mode, the number of display characters for the HD
Radio station name can be selected.
SHORT : 7 characters (FM)
4 characters (AM)
LONG : 56 characters

Digital Seek ON/OFF Setting

DIG SEEK ON / DIG SEEK OFF (Initial Setting)
ON : SEEK UP/DOWN is used only for Digital Radio
Station.
OFF : SEEK UP/DOWN is used for all Radio Stations.
/ /ENT.
to select AUX mode and
19
-EN