Maxtor OneTouch User Manual page 64

In this window you can modify many aspects of your
backup, including which drives you will back up and the
backup destination. For more information, see the
Retrospect Express manual that came with your
Maxtor drive.
6. Make any changes to your script needed.
7. Close the EasyScript Backup window.
A message will appear asking: 'Save changes to script?'
8. Click Save.
4
9. If the Scripts window is still open, close it.
10. Quit Retrospect by going to the File menu and choosing Quit.
When you quit Retrospect, a window will appear telling you:
'Script EasyScript Backup is next for automatic execution.'
If you get the message that 'the configuration isn't ready,'
click Don't Quit, make sure that your OneTouch drive is
connected and turned on and quit Retrospect again. If this
still doesn't work, try creating a new EasyScript.
Your modified script has been saved and will run at the next
scheduled time as long as your computer is on and your Maxtor
OneTouch drive is connected and turned on.
58