Maxtor OneTouch User Manual page 29

2. Plug the other end of the FireWire cable into an
available FireWire port on the back of the drive.
FireWire Ports
Figure 8. Connecting to a FireWire port
3. Depending on the size of your drive, version of OS X, your next
step will vary. Find your version of OS X in the table below to
determine your next step.
Table 3: Capacity Under 137 GB
OS Version Message
Message appears
saying OS X is
OS X 10.1
unable to read
volume.
Drive mounts as
OS X 10.2
"Untitled Volume."
FireWire
Ports
Your next step
Go to Step 4.
Open the Apple Disk Utility
located in the Utilities folder
within the Applications folder
on your Macintosh and
proceed to Step 5.
Table 4: Capacity Over 137 GB
OS Version Message
Message appears
saying OS X is
OS X 10.1
unable to read
volume.
Drive doesn't
appear on the
OS X 10.2
Desktop.
4. Click Initialize.
The Disk Utility program opens.
5. Select your new drive from the list on the left.
Make sure you select your new drive.
This utility will erase all data on the drive.
A description of the drive appears in the window.
Your next step
Go to Step 4.
Open the Apple Disk Utility
located in the Utilities folder
within the Applications folder
on your Macintosh and
proceed to Step 5.
Installing Your Drive 24
2