Maxtor OneTouch User Manual page 18

Make your choice and click Next.
9. The Step 3 screen is displayed. Select the Maxtor OneTouch
drive or another drive on your computer as the location to store
the copy of your files. Click Next.
2
You cannot select the same drive to be both the source and
destination for your files. The source and destination drives
must be different.
The "Congratulations... now ready" screen appears.
10. To complete the Maxtor OneTouch setup, click Finish.
If you would like to do your first backup immediately, click the
Start Now button. Retrospect will copy your files and the
message: 'Execution completed successfully' will appear.
When you are finished, you can Exit Retrospect.
11. Go to the File menu and choose Exit.
You are now ready to use the Maxtor OneTouch feature.
Each time you touch the button, Retrospect makes a copy of the
folders and files on your source drive exactly as
they exist at that time.
The OneTouch button may not function when Retrospect is
already running. To correct the problem, go to the File menu
in Retrospect, and choose Exit.
Your hardware and software installation is now complete. See
"Using Your Drive" on page 37 in chapter 3. for information on
using your drive for common applications and on using Retrospect
to make copies of your important files and restore copied files.
13
Windows 98SE and ME:
Installing the Software
1. Turn on your computer
2. Insert the Maxtor Installation CD into your CD-ROM drive. After
a few seconds, the Maxtor Installer screen will open.
3. Select your language.
The Main Menu will appear next.
4. Select Install Software.
The Install Software screen will appear.
5. Select Full Installation or Custom Installation.
(Full Installation is recommended.) See Software Installation
Options on page 1 of this chapter for more information.
Note: If you do not install the Retrospect program, you will not
be able to use it with the OneTouch backup feature described
later in this guide.
It may take a few seconds for the next screen to appear.
If a message appears asking you to restart, follow the onscreen
directions to Restart your computer. (Please do not eject the
Installer CD.)
The InstallShield welcome screen will appear.
6. Click Next.
The License Agreement screen will appear.