Deleting Items From Disk - Akai CD3000XL Operator's Manual

With a hard disk fitted, MIDI Program Change messages may be used to load volumes. Use the
volume. Once set, you may turn this on and off freely in the
receipt of a Program Change message, the CD3000XL will scan all the hard disk volumes for a
number set in this page which corresponds to the Program Change number in the MIDI
message. The volume will then be loaded (the currently-selected program number will change
to 1 and program number 1 of the volume which has just been loaded will be selected).
NOTE: To rename a disk or a file on a floppy disk, removable cartridge or Magneto Optical disk,
write-protection must be off.
At any time, press F1 - SAVE - to return to the main SAVE screen.

DELETING ITEMS FROM DISK

Pressing the
You can delete a file (or files) from a floppy disk or hard disk. If you have a hard disk fitted, select
the volume using the parameter field on the first line. There are a number of options that you
can pick to determine what file(s) will be deleted.
CURSOR ITEM ONLY
ALL PROGRAMS ONLY
ALL SAMPLES
ENTIRE VOLUME
OPERATING SYSTEM
NOTE: In order to delete a file or files from a floppy disk, removable cartridge or Magneto
Optical disk, write-protection must be off, of course.
At any time, press F1 - SAVE - to return to the main SAVE screen.
CD3000XL OperatorÕs Manual
parameter on this page to assign a number from 1 to 128 for the current
key displays this screen:
As its name suggests, deletes only that file which is
highlighted by the cursor.
This deletes all programs, but not their associated samples.
This deletes all samples on the current volume.
This is the most drastic, erasing all data on the volume.
This removes the operating system from the volume.
S A V E
field. On
Page 215