Table of Contents
Advertisement
s5000 / s6000
QUICKSAVE
Pressing QUICKSAVE will show this screen:
The currently active multi is selected to save. You see its name and the folder it will be saved to.
You also have the option to save all the multis in memory if you prefer (or just the currently selected
one) with or without the associated programs and samples.
The CHECK NAMES key allows you to disable the file checking - with it ON (checked
of the same name exists in the selected folder, you will be prompted and asked if you want to
overwrite it or not. With CHECK NAMES switched OFF (checked
automatically be overwritten without prompting you.
The defaults are sensibly chosen to save just the selected multi and all its programs and samples
(though to save time, if you have previously saved all the programs and samples and are happy
that they are ok and/or haven't been edited or changed in any way, you can disable PROGS/
SAMPS and just save the multi which will be very quick).
Press EXECUTE to save; CANCEL SAVE to abort.
NOTE: The folder the multi(s) will be saved to is shown. If this is not the right one, you should
press CANCEL SAVE and use the actual SAVE function to navigate your way to the folder
where you want the multi to be saved. The 'full' SAVE function is described in a separate
chapter.
Version 1.21
MULTI
), if a multi
), files of the same name will
53
Advertisement
Table of Contents
