Table of Contents
Advertisement
UTILITIES
PREFERENCES
This allows you to personalise your sampler's settings. Pressing PREFERENCES shows something
like this screen:
The parameters are:
NOTE DISPLAY
LOOP DISPLAY
SCREEN DISPLAY
SCREEN SAVER
KEY REPEAT DLY
FAN SPEED
NOTE: The FAN SPEED control is only applicable to the S6000. This parameter does not
appear on the S5000.
222
This allows you to choose whether to display notes as MIDI numbers
(i.e. 0-127) or as names (C 0 - G 8) in all displays where notes are
shown.
This allows you to select whether LOOP LENGTH is displayed in time
(i.e. 1 sec) or samples (i.e. 44100).
This allows you to invert the screen display. You may have white lettering
on a blue background (NORMAL) or blue lettering on a white background
(INVERTED).
This turns off the LCD's backlight at timed intervals in order to preserve
it. If the function is enabled, the backlight will switch off after n minutes
of inactivity. To re-activate it, press any key.
This sets the delay time before certain keys such as SCROLL UP/DOWN
and SELECT keys start auto-repeating.
This sets the speed of the internal fan, used to cool any hard drives that
may be installed. The options are SLOW or NORMAL.
s5000 / s6000
Version 1.21
Advertisement
Table of Contents
