Table of Contents
Advertisement
28
LUBRICATION
Level 1.
Tools Required: 8 & 13 mm Open End Wrench, Screwdriver,
Clean Rag.
Parts Required: POWER BLENDX
Base Grease.
Gear Housing
1.
Clean all loose debris from gear box.
2.
Remove the plug (A) and drain screw (B) from the gear case.
3.
Add grease into the gear case until old grease is pushed out. If
necessary, use a low pressure pump.
4.
Reinstall the drain screw and plug.
8 oz. (P/N 91014) or Lithium
TM
B
A
Advertisement
Table of Contents
