American DJ Revo Roll LED User Instructions page 5

Revo Roll LED™
I TLT -
Tilt Inversion
1. Tap the either the MENU button until "I TLT" is displayed,
press ENTER. Either NO or 1 will be displayed.
2. To activate the Tilt inversion tap the UP or DOWN buttons
until I is displayed, press ENTER to confim and exit. To deacti-
vate Tilt inversion, select No and press Enter.
LED -
With this function you can switch the lamp on or off
via the control board.
1. Tap the either the MENU button until "LED" is displayed,
press ENTER.
2. The display will show either "ON" or "OFF". Press the UP or
DOWN buttons to select "ON" to switch on the LED, or "OFF" to
switch off the LED.
3. Press ENTER to confirm and exit.
I DSP -
This function will reverse the display 180º.
1. Tap the either the MENU button until "I DSP" is displayed,
press ENTER.
2. Tap the UP button until "FLIP" is displayed.
3. Press ENTER, the display will show "ON/OFF".
4. Press the UP button to select "ON" to activate this function,
or "OFF" to deactivate this function.
5. Press ENTER to confirm.
FHRS
- With this function you can display the running time
of the unit.
1. Tap the either the MENU button until "FHRS" is displayed,
press ENTER.
American DJ - www.americandj.com - Revo Roll LED™ Instruction Manual Page 9
®
System Menu Revo Roll LED™
2. The display shows the running time of the unit. Press MENU
to exit.
RSET
1. Tap the either the MENU button until "RSET" is displayed,
press ENTER.
2. The fixture will now reset.
American DJ
- Use this function to reset the unit.
- www.americandj.com - Revo Roll LED™ Instruction Manual Page 10
®
System Menu