American DJ RollerTron User Instructions
American DJ RollerTron User Instructions

American DJ RollerTron User Instructions

Advertisement

Quick Links

User Instructions
Revised 2/03
American DJ
®
4295 Charter Street
Los Angeles CA. 90058
www.americandj.com
RollerTron™
Unpacking:
Thank you for purchasing the RollerTron™ by American
DJ
. Every RollerTron™ has been thoroughly tested and has been
®
shipped in perfect operating condition. Carefully check the shipping
carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fixture for any
damage and be sure all equipment necessary to operate the unit has
arrived intact. In the event damage has been found or parts are miss-
ing, please contact our toll free customer support number for further
instructions. Please do not return this unit to your dealer without first
contacting customer support.
Introduction:
The RollerTron™ is a five channel DMX intelligent scan-
ner with a unique barrel mirror that may be easily converted to an intel-
ligent color changer by removing the mirror unit. This unit can also run
as a stand alone, sound-active unit, or in a Master/Slave configuration
as either a scanner or color changer. The RollerTron™ comes with sev-
eral build in programs that are compatible with the ScanTron™ and is
best used in multiples of four. When used as a stand alone unit or when
used in multiples linked in a master/slave configuration the optional
IRC/1 controller may be used. The optional controller will access differ-
ent programs and control a blackout function. For best results use fog
or special effects smoke to enhance the beams projections.
Customer Support:
American DJ
support line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.americandj.com for any com-
ments or suggestions. Service Hours are Monday through Friday 9:00
a.m. to 5:00 p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2610
E-mail:
support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact American DJ
.
®
American DJ
- www.americandj.com - RollerTron™ Instruction Manual Page 2
©
®
General Information
provides a toll free customer
®

Advertisement

Table of Contents
loading

Summary of Contents for American DJ RollerTron

  • Page 1 This unit can also run as a stand alone, sound-active unit, or in a Master/Slave configuration as either a scanner or color changer. The RollerTron™ comes with sev- eral build in programs that are compatible with the ScanTron™ and is best used in multiples of four.
  • Page 2 Product Registration frayed or broken. The RollerTron™ carries a one year limited warranty. Please fill out the • Do not attempt to remove or break off the ground prong from enclosed warranty card to validate your purchase. All returned service the electrical cord.
  • Page 3: Controls And Functions

    DMX signal to another DMX fixture, or transmit a Master/Slave signal to the nest RollerTron™ in the chain. For best results in DMX or Master/ Slave mode terminate this jack if it is the last unit in the chain. See “Terminator”...
  • Page 4: Operation

    Note: In Stand-Alone and Master-Slave operation the units will black- the last fixture. out to conserve lamp life when a sound source is not received. American DJ - www.americandj.com - RollerTron™ Instruction Manual Page 7 American DJ - www.americandj.com - RollerTron™ Instruction Manual Page 8 ©...
  • Page 5: Dmx Channel

    The RollerTron™ is a five channel DMX unit. The DMX address is gle controller, as long as all fixtures and the controller are DMX com- set on the bottom panel of the RollerTron. ™ Your unit and your DMX pliant. To ensure proper DMX data transmission, when using several controller require a standard 3-pin XLR connector DMX fixtures try to use the shortest cable path possible.
  • Page 6 Pin 3 Not Used Pin 4 - Do Not Use Not Used Pin 5 - Do Not Use American DJ - www.americandj.com - RollerTron™ Instruction Manual Page 11 American DJ - www.americandj.com - RollerTron™ Instruction Manual Page 12 © ® ©...
  • Page 7: Troubleshooting

    3 Gently pull the up and away from the output lens. American DJ - www.americandj.com - RollerTron™ Instruction Manual Page 13 American DJ - www.americandj.com - RollerTron™ Instruction Manual Page 14 ©...
  • Page 8: Specifications

    ©American DJ® A Division of the American DJ® Group of Companies World Headquarters: 4295 Charter Street Los Angeles, CA 90058 USA Tel: 323-582-2650 Fax: 323-582-2610 Web: www.americandj.com E-mail: info@americandj.com...

Table of Contents