Operation - American DJ Accu UFO User Instructions

Accu UFO
03Er – TILT movement error:
If the head is not located in the default tilt position after start-
up or after a reset command. This message will appear after a
fixture reset, if the tilt magnetic-indexing circuit malfunctions
(sensor failed or magnet is missing) or there is a stepper motor
failure (defective motor or a defective motor IC drive on the
main PCB).
American DJ - www.americandj.com - Accu UFO Instruction Manual Page 29
®
Error Codes Accu UFO
Operating Modes: The Accu UFO can operate in three different
modes. This next section will detail the differences in the oper-
ating modes.
• Sound Active mode -
The unit will react to sound.
• Auto mode -
The unit will run through a built-in program.
• DMX control mode -
This function will allow you to control each individual fixtures traits
with a standard DMX-512 controller such as the Elation
Designer.
Universal DMX Control:
versal DMX-512 controller such as the Elation
Elation
gobo wheel, prism, and the shutter (strobe). A DMX controller allows
you to create unique programs tailored to your individual needs.
1. The Accu UFO uses ten DMX channels. See pages 32-33 for de-
tailed description of the DMX traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 7-9 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller's faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 13 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Stand-Alone (Sound Active or Auto Program):
a single unit to run to the beat of the music or run through a built-in
program.
1. Access the main menu.
2. Tap the UP button until
3.
Tap the UP button until "AUTO" is displayed, and Press ENTER.
4. Press the UP or DOWN button to select "RUN", or "AUDI". "RUN"
will make the unit run through a built-in program. "AUDI" will make
the unit sound active.
™
This function allows you to use a uni-
Show Designer™ to control head movement, the color wheel,
®
"PLAY" is displayed, and Press ENTER.
American DJ - www.americandj.com - Accu UFO Instruction Manual Page 30
®

Operation

Show
®
DMX Operator™ or
®
This mode allows