Removing Seat Pad For Cleaning - DJG Alpha Omega Owner's Manual

Removing Seat Pad for Cleaning

Remove base and harness as described in the "Belt-
Positioning Booster" section.
1
B
A
2
A
From underneath bottom
of shell, release the 2
elastic straps (A). Undo
the 4 clips on the side of
the shell (B).
Adjust backrest to lowest
position. Remove harness
guides in bottom of seat
(A).
Push harness guide lip
toward outside of shell
with one hand while
pulling through the front
with the other.
48
3
4
5
Replace seat pad by reversing order; put pad on headrest
and replace harness guides. Starting from bottom of
child restraint, slip pad on shell; tuck in pad around
harness adjuster and over upper belt guides. Make sure
pad is under headrest and replace lower harness guides.
Rethread harness (see belt-positioning booster section).
Work pad off shoulder belt
guides and off of headrest.
Pull pad out from under
buckle cover and work it
off the shell.
From the back, use a
screwdriver to press in on
lip of harness guide and pop
guides through the front.
Pull cover off headrest.
Clean with warm sudsy
water, rinse clean, air dry.
Do not use bleach or other
harsh cleaners.
49