Belt-Positioning Booster Installation - DJG Alpha Omega Owner's Manual

Alpha omega 3-in-1
Hide thumbs Also See for Alpha Omega:
Table of Contents

Advertisement

Belt-Positioning Booster
Installation
1
2
3
Rotate recline stand
down, then push up firmly
until it locks in place.
Place booster seat against
the back of the vehicle
seat.Tuck the top
anchorage hook under the
recline stand. Have child
sit in seat with his back
and bottom fully in the
seat.
Place BOTH shoulder and
lap belt across child's thighs.
Lock buckle.
continued on next page.
44
4
WARNING
!
For vehicles with an air bag, but without a
back seat, refer to your vehicle owner's
manual.
Do Not Use only the lap
belt when using this seat
as a belt-positioning
booster without the
internal harness.
The shoulder belt must
always be adjusted snugly
across the child's chest.
NEVER place the
shoulder belt under the
child's arms.
Failure to follow these
warnings can result in serious injury or
death to your child.
Secure the shoulder belt
through one of the
notches in the shoulder
belt guide.The belt
should cross the base of
the child's neck and
across the chest (not the
face or neck). Pull up on
the shoulder belt to
tighten.
Check periodically to
ensure your child has not
moved out of position and
loosened the shoulder
belt.
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Alpha omega 3-in-1

Table of Contents