Specifications - Cateye MSC-3Dx User Manual

Display functions (Icon)
Upper display Current speed
Cadence
Clock time
Speed icon
Cadence icon
Clock time icon
Center display Heart rate
Heart rate icon
Record memory icon
Auto icon
Alarm icon
Used memory icon
Wheel circumference icon
Lower display Elapsed time
Maximum heart rate
Clock time
Cadence
Current speed
Lap count
Average speed
Maximum speed
Trip distance
Total distance
Zone remaining time
Pace icon
Additional features Heart rate target zone
Memory Record feature
Lap feature
Others
Control system:
Display system:
Speed (Cadence) signal detection system:
Heart rate signal transfer system:
Operating temperature range:
Storage temperature range:
Wheel circumference set range:
Applicable pipe diameter:
Length of Wire:
Power supply/battery life:
Dimensions/Weight:
Designs and specifications are subject to change without notice, due to modifications or improvements.
*1) Windows 95 or Windows 98 required; RS232C (serial port) needed
30
MSC-3Dx

SPECIFICATIONS

Range
0.0(3.0) - 65.9 mph [0.0(4.0) - 105.9 km/h]
0(20) - 299 rpm
1:00 - 12:59 [0:00 - 23:59]
Illuminates when Current Speed is selected.
Illuminates when Cadence is selected.
Illuminates when Clock Time is selected.
0 - 299 bpm
Blinks when the heart rate signal is received.
Illuminates when the record memory feature is activated.
Illuminates when the Auto Time (automatic start/stop) feature is activated.
Illuminates when the alarm for heart rate target zone is operated.
Illuminates when using record memory rate (%) is indicated on display.
Displays the wheel circumference currently active.
0:00'00" - 9:59'59"
0(20) - 299 bpm
1:00 - 12:59 [0:00 - 23:59]
0 - 299 rpm
0.0(3.0) - 65.9 mph [0.0(4.0) - 105.9 km/h]
LP-00 - LP-50 (Lap Feature)
0.0 - 65.9 mph [0.0 - 105.9 km/h]
0.0(3.0) - 65.9 mph [0.0(4.0) - 105.9k m/h]
0.00 - 999.99 mile [km]
0.0 - 9999.9 / 10000 - 99999 mile [km]
0.00'00" - 9.59'59"
Displays whether the speed is higher or lower than the average speed. (Pace Feature)
Heart rate range is divided into 4 zones and Time In Pulse Zone is measured and saved
(Alarm may be set in each zone).
Saves measurement data for 5 files or maximum 2,560 points (Memory Record Interval
timing may be selected from 5, 15, 30 or 60 sec.).
Saves for a maximum 50 points (Minimum interval: 5 sec.).
Power saving feature (Auto reset upon receipt of speed sensor signal or forced reset by
button operation).
Download saved data to a PC (Optional download kit is required).
4-bit one-chip microcomputer, crystal oscillator
Liquid crystal display (equipped with the LED backlight)
Noncontact magnetic sensor
Wireless signal simultaneous transfer (Transmission distance: Approx. 90 cm)
32 F - 104 F [0 C - 40 C] (Can be used below 0 with slower screen response.)
–4 F - 122 F [–20 C - 50 C]
10 - 3000mm / A/B switching method, initial value: A-2096, B-2050
11Ø - 36Ø
Speed sensor: 70 cm
Pre-installed batteries are for primarily for factory testing purpose. Their life may be shorter than replacement batteries.
Normal battery life as follows:
Main unit: CR2032 x 1 / approx. 2 years (When using 1 hour/day)
Heart rate sensor: CR2032 x 1 / approx. 2 years (When attaching to body 1 hour/day)
Main unit: 1-13/16" x 2-1/16" x 19/32" [46.0 x 52.5 x 14.4 mm] / 1.52 oz. [43 grams]
Heart rate sensor: 13" x 1-7/16" x 19/32" [330 x 36 x 15 mm] / 2.19 oz [62 grams]
Cadence sensor: 120 cm
Standard accuracy
0.5 mph (under 31mph)
1 rpm
0.003%
1 bpm
0.003%
1 bpm
0.003%
1 rpm
0.5 mph (under 31 mph)
0.5 mph
0.5 mph (under 31 mph)
0.01 mile (under 31 mph)
0.1/1 mile (under 31 mph)
1"
*1